Deckmaster HFS Flooring

Deckmaster HFS is a cutting-edge three-component polyurethane system tailored for high-friction surfacing applications on concrete and polymer-modified sand/cement screeds. Engineered with an emphasis on durability, Deckmaster HFS excels in impact, abrasion, and chemical resistance, making it an ideal choice for demanding environments.  

Types of Deckmaster HFS Flooring

Deckmaster HFS ID

Deckmaster HFS ID is a three-part polyurethane system great for high-friction surfacing on concrete and polymer-modified sand/cement screeds. Built for durability, it resists abrasion, impact, and chemicals. This makes Deckmaster HFS ID a reliable option for surfaces under stress, ensuring lasting performance even in harsh conditions.

Uses of Deckmaster HFS Flooring

Deckmaster HFS ID is made for indoor floors, parking decks, and ramps where looks, textured profile, slip resistance, and easy cleaning are needed. Its flexible design meets safety and durability standards while improving the surface’s appearance. It’s a good fit for areas with heavy foot and vehicle traffic, offering practical use and a pleasant look.

Characteristics of Deckmaster System HFS ID

• High bond strength adhesion
• High abrasion and wear resistance
• Class1>40 units wet tested for interior wet surfaces
• Class11>40 units dry tested for interior dry surfaces
• Class111>55units wet tested for exterior surfaces
• Chemical resistant ISO 2812-1: 1995
• A range of standard colours

Deckmaster HFS ID	Product	Coverage
Primer(if required)	Deckmaster DPM Primer	0.4kg/m2
Deckmaster HFS ID	Deckmaster HFS ID	2.0kg/m2(subject to surface regularity)
Unit Sizes	25.8kg units comprising resin, hardener and graded fillers

Useable working life*	Temperature		Time
	10 °C		25minutes
	20 °C		15minutes
	30 °C		< 10minutes
Over-coat time*	Temperature	Minimum	Maximum
	10 °C	24	48
	20 °C	12	48
	30 °C	8	24
* Times are approximate and can vary depending on site conditions, including temperature and relative humidity.

Deckmaster HFS UVR Flooring

Deckmaster HFS UVR is a three-component polyurethane high-friction surfacing system for indoor and outdoor use. It works with concrete, polymer-modified sand/cement screeds, and proper prepared asphalt and Tarmac surfaces. Deckmaster HFS UVR is designed for durability, offering good resistance to impact, abrasion, and chemicals. Its design provides long-lasting protection and safety across many demanding applications.

Uses of HFS UVR Flooring

Deckmaster HFS UVR is made for vehicle traffic, including parking decks and ramps, where a mix of good looks, textured surface, slip resistance, and easy cleaning is needed. Its special formula ensures its unique heavy vehicle movement and keeps its nice finish over time. The slip-resistant texture and easy cleaning make it an excellent choice for areas where safety and use are essential, keeping surfaces functional and attractive. This makes Deckmaster HFS UVR suitable for places needing strong performance without sacrificing looks.

Characteristics of Deckmaster System HFS UVR

• UV resistance
• Rapid installation
• Anti-slip properties
• Chemical resistance
• Abrasion resistance
• Seamless
• A range of standard colours in a high-sheen finish.

Deckmaster HFS UVR	Product	Coverage
Primer(if required)	Deckmaster DPM Primer	0.4kg/m2
Deckmaster HFS UVR	Deckmaster HFS UVR	2.0kg/m2(subject to surface regularity)
Unit Sizes	18kg units comprising pre-proportioned resin, hardener and graded fillers

Useable working life*	Temperature		Time
	10 °C		25minutes
	20 °C		15minutes
	30 °C		< 10minutes
Over-coat time*	Temperature	Minimum	Maximum
	10 °C	24	48
	20 °C	12	48
	30 °C	8	24
* Times are approximate and can vary depending on site conditions including temperature and relative humidity.

Application Conditions

• General Guidance – Products should be stored before use so that their properties are not impaired.
• Substrate & Ambient Temperature – 5–30 °C
• Substrate Moisture Content – Hygrometer readings up to 90% RH, measured by BS 8203, can be accommodated.
• Dew point—The substrate and uncured floor must be at least 3 °C above the dew point to avoid condensation/blooming.

Application Methods

Mixing and Application Instructions

To prepare and use Deckmaster systems, start by adding the hardener to the resin. Use a low-speed mixer (300-400 rpm) to mix thoroughly for at least 3 minutes until uniform. Keep the mixing paddle submerged to avoid air bubbles, and often scrape the sides and bottom of the container.

Mix the coloured resin before adding the hardener. After adding the hardener, mix again with a low-speed mixer (200-500 rpm) for 1 to 2 minutes until thoroughly blended. Gradually add the filler and mix for 1-2 minutes until smooth.

Use the mixed material immediately as it heats up and becomes less workable, especially in warm conditions. To apply, use a flat squeegee, trowel, or spattle to ensure the resin spreads evenly. Finish with a medium nap roller. Note: New squeegees should be roughened before first use.

Cleaning of Tools

All tools should be cleaned with Deckmaster Cleaning Solvent immediately after use. Cured material can only be removed mechanically. It is important not to add solvent to the product to facilitate application.

If you want Deckmaster HFS as a Solution for Surface Applications, Call Us Today!

Ready to elevate your surface applications with the durability and reliability of Deckmaster HFS flooring? Contact our experts to discuss your specific needs and discover the perfect solution tailored to your environment. Call us today and take the first step towards a safer, more resilient surface. Let’s create a foundation for success together!

(Always consult the manufacturers data sheet before the application of this product!)