The Deckmaster System Flooring offers a reliable and durable solution for your flooring needs. It provides exceptional quality and durability for both residential and commercial use. This system is easy to install and maintain, ensuring long-lasting performance. Deckmaster is designed to withstand heavy foot traffic and environmental factors.
Types of Deckmaster System Flooring
Deckmaster System ID
Deckmaster System ID is a slip-resistant coating for traffic decks.
Uses of Deckmaster Sustem ID
Deckmaster System ID can be used on concrete, polymer-modified cementitious screeds, and asphalt after surveys and assessments. It is suitable for car park decks and ramps, providing seamless protection.
Characteristics of Deckmaster System ID
- High bond strength adhesion
- High abrasion and wear resistance
- TRL slip PTV values wet >55 Class111
- Chemical resistant ISO 2812-1: 1995
- A range of UV stable standard colours
| Deckmaster System ID | Product | Coverage | |
| Primer | Deckmaster DPM Primer | 0.3kg/m2 | |
| Aggregatewashed dried, and graded | Quartz0.3-0.6mm | 2.0 kg/m2 | |
| Sealer | Deckmaster UVR Finish | 0.6kg/m2 | |
| Unit Sizes | 10 kg, 15kg & 20 kg units comprising resin and hardener | ||
| Note | All asphalt substrates must be surveyed and assessed before specifications can be submitted. | ||
| Useable working life * | Temperature | Time | |
| 10 °C | 20 minutes | ||
| 20 °C | 15 minutes | ||
| 30 °C | < 10 minutes | ||
| Over-coat time * | Temperature | Minimum | Maximum |
| 10 °C | 24 | 36 | |
| 20 °C | 16 | 24 | |
| 30 °C | 12 | 18 | |
| * Times are approximate and can vary depending on site conditions, including temperature and relative humidity. | |||
Deckmaster System R
Deckmaster System R is a waterproofing system for decks. It bridges cracks, allows traffic, and resists slipping.
Uses of Deckmaster Sytsem R
Deckmaster System R is suitable for concrete, polymer-modified cementitious screeds, and asphalt surfaces. It works for both external and internal car park decks and ramps. Deckmaster System R offers seamless leak protection for car park decks, balconies, and roofs.
Characteristics of Deckmaster System R
- High bond strength adhesion
- Dynamic crack-bridging Class b 4.2 (-100C).
- High abrasion and wear resistance
- TRL slip PTV values wet >55 Class111
- Chemical resistant ISO 2812-1: 1995
- A range of UV-stable standard colours
| Deckmaster System R | Product | Coverage | |
| Primer | Deckmaster DPM Primer | 0.4kg/m2 | |
| Aggregate washed, dried, and graded | Quartz 0.7-1.2mm | 2.0 kg/m2 | |
| Membrane (One coat) | Deckmaster membrane | 2.5 kg/m2 | |
| Aggregate washed, dried, and graded | Quartz 0.7-1.2mm | 2.0 kg/m2 | |
| Sealer | Deckmaster UVR Finish | 0.9kg/m2 | |
| Unit Sizes | 10 kg, 15kg & 20 kg units comprising resin and hardener | ||
| Note | All asphalt substrates must be surveyed and assessed before specifications can be submitted. | ||
| Useable working life * | Temperature | Time | |
| 10 °C | 20 minutes | ||
| 20 °C | 15 minutes | ||
| 30 °C | < 10 minutes | ||
| Over-coat time * | Temperature | Minimum | Maximum |
| 10 °C | 24 | 36 | |
| 20 °C | 16 | 24 | |
| 30 °C | 12 | 18 | |
| * Times are approximate and can vary depending on site conditions, including temperature and relative humidity. | |||
Deckmaster System RHD
Deckmaster System RHD is a waterproofing solution for decks. It bridges cracks, resists traffic, and prevents slipping.
Uses of Deckmaster System RHD
Deckmaster System RHD can be applied to concrete, modified cementitious screeds, and asphalt substrates. It is suitable for external and internal car park decks and ramps. Deckmaster System RHD provides seamless leak protection for car park decks, balconies, and roofs.
Characteristics of Deckmaster System RHD
- High bond strength adhesion
- Dynamic crack-bridging Class b 4.2 (-100C).
- High abrasion and wear resistance
- TRL slip PTV values wet >55Class111
- Chemical resistant ISO 2812-1: 1995
- A range of UV-stable standard colours
| Deckmaster System R HD | Product | Coverage | |
| Primer | Deckmaster DPM Primer | 0.4kg/m2 | |
| Aggregate washed, dried, and graded | Quartz 0.7-1.2mm | 2.0 kg/m2 | |
| Membrane (First coat) | Deckmaster membrane | 1.2 kg/m2 | |
| Rubber crumb | Rubber crumb | 2.0kg/ m2 | |
| Membrane (Second coat) | Deckmaster membrane | 1.3kg/m2 | |
| Aggregate washed, dried, and graded | Emery0.5-1.0mm | 3.0 kg/m2 | |
| Sealer | Deckmaster UVR Finish | 0.9kg/m2 | |
| Unit Sizes | 10 kg, 15kg & 20 kg units comprising resin and hardener | ||
| Note | All asphalt substrates must be surveyed and assessed before specifications can be submitted. | ||
| Useable working life * | Temperature | Time | |
| 10 °C | 20 minutes | ||
| 20 °C | 15 minutes | ||
| 30 °C | < 10 minutes | ||
| Over-coat time * | Temperature | Minimum | Maximum |
| 10 °C | 24 | 36 | |
| 20 °C | 16 | 24 | |
| 30 °C | 12 | 18 | |
| * Times are approximate and can vary depending on site conditions, including temperature and relative humidity. | |||
Preparation of Substrate
Inadequate preparation will lead to loss of adhesion and failure. Weak, damaged and deteriorated concrete should be removed where necessary and repaired. The laitance and any surface sealer or curing membrane should be entirely removed by vacuum contained shot-blasting to expose the aggregate cleanly. High spots should be removed by grinding. The prepared substrate should be protected from further contamination prior to application.
Substrate Quality
Test the surface strength of the base concrete after preparation once surface laitance is removed. The concrete should have a rebound hammer reading per BS EN 12504-2:2001, Type N, of at least 25 and a surface tensile strength exceeding 1.5 N/mm² according to EN 1542. Ensure the substrate is clean and free from dust, loose materials, and contaminants that reduce bond or prevent suction. Use a vacuum for cleaning. Apply a test area to measure bond strength as per EN 1542 to confirm results.
Application Conditions
- General guidance – Do not apply if rain is expected. Store products properly before use to maintain their properties.
- Substrate & ambient temperature – 5–30 °C
- Substrate moisture content -Hygrometer readings can reach up to 98% RH. Measurements are taken according to BS 8203 standards.
- Dew point – Ensure the substrate and uncured floor are at least 3 °C above the dewpoint to prevent condensation or blooming.
Application Methods
Mixing: Add the hardener to the resin and mix with a low-speed electric mixer (300-400 rpm) for at least 3 minutes until smooth. Keep the paddle submerged to avoid air bubbles, and scrape the sides and bottom of the vessel.
Application: Use a flat-bladed squeegee and pile roller for the DPM Primer. Apply the membrane evenly with a spattle, spatula, or trowel at the required coverage rate. Apply the UVR seal coat with the same squeegee and pile roller as used for the DPM primer layer. The resin floor provides a smooth and continuous surface essential for high-traffic areas.
If You Want an Anti-Slip, Waterproof Solution for Your Flooring, Call DC Flooring Today!
Contact DC Flooring now for a reliable, anti-slip, waterproof flooring solution. Our team is ready to assist with expert advice and premium products. Ensure safety and durability for your decks and surfaces today. Trust us for seamless installation and outstanding results. Call today and let us help you meet your flooring needs effectively.
(Always consult the manufacturers data sheet before the application of this product!)
FAQs
How does the Deckmaster System differ from traditional flooring options?
The Deckmaster System offers superior performance over traditional flooring. It is designed with high-strength adhesion and dynamic crack-bridging. This system is resistant to chemicals and wear. It also provides a slip resistant surface, which is crucial for safety. Its UV stable colors maintain their appearance over time.. Its robust design ensures long-lasting durability under various environmental conditions. The system’s flexible nature accommodates structural movements without compromising surface integrity. This makes the Deckmaster System a durable solution for both internal and external surfaces.
What is the installation process for Deckmaster System Flooring?
The installation process for Deckmaster products is efficient and straightforward. Below are the key steps you need to follow in order to install it successfully:
- Surface Preparation: Clean and smooth the substrate.
- Primer Application: Apply Deckmaster DPM Primer using a squeegee and roller.
- First Membrane Coat: Spread the first coat evenly with a trowel.
- Aggregate Layer: Add a layer of aggregate for texture.
- Second Membrane Coat: Apply the second coat to seal.
- Sealer Application: Use the UVR Finish sealer for durability.
- Completion: Ensure all layers are applied evenly for a seamless finish.
For optimal results, complete the installation in a dry, well-ventilated bay to prevent moisture interference.
Can I install Deckmaster System Flooring over existing surfaces?
Yes, Deckmaster System Flooring can be installed over existing surfaces if they are suitable. Ensure the surface is clean, level, and free from any contaminants. Remove loose materials, sealers, or coatings that might affect adhesion. Conduct a bond test to verify the substrate’s suitability. Follow the recommended preparation and installation guidelines for the best results.
